Home > Order SKYLIFT Roof Risers >

18" Long Riser, 3-1/2" Saddle, Standard Duty, Black
18" SkyLift roof riser bracket
18" roof riser bracket

Our Price: $139.99

Availability: Usually Ships in 24 Hours
Product Code: SK18-B

Description Technical Specifications Additional Item You'll Need
Installation Overview
  • Professional Product Engineering stamp available. Rebate up to $60.
    SkyLift Hardware - Engineering Express.
    No rebate available for PROJECT engineering.

    1. Determine approximate positioning or layout of all SkyLift roof riser brackets prior to cutting any access holes. SkyLift positioning must be directly over exterior bearing walls. Take into consideration roofing material layout, rafter locations, and interior conditions. Repositioning may be necessary due to discovered conditions.
    2. Remove roofing shingles/tiles carefully and save for reinstall.
    3. Square and mark location.
    4. SET SAW DEPTH to avoid cutting concealed items. Check wall plate and avoid obstructions or concealed items.
    5. Cut access hole (minimum 3-1/2" x 6") through the roof decking/sheating, directly over the exterior bearing wall.
    6. If unfavorable conditions are discovered, reposition the bracket location. (Before cutting any roof trusses or rafters, always obtain expert guidance and professionally prepared plans.)
    7. Insert the SkyLift roof riser bracket through the access hole and attach to the exterior wall top plate using 4 ea. 1/4" x 3" Simpson Strong-tie SDS screws (included).
    8. Remove the SkyLift saddle and fit a standard pipe jack flashing (not included) over the SkyLift riser column. Follow manufacturer's instructions on sealing pipe jack flashing to roof.
    9. Cut and fit the roofing (removed in step #3) around the pipe jack flashing and reinstall. 10. Replace the SkyLift saddle and bolt to the SkyLift riser column (3/8" bolt and nut included).
    11. Seat your cross beam in the SkyLift saddle and secure with Simpson Strong-tie SDS screws (included)
    See instructions included with bracket for important safety and warranty information, limitations of warranties and disclaimers.

Roof Snake
Our Price: $29.00

Roof Snake

Share your knowledge of this product. Be the first to write a review »