Home > Order SKYLIFT Roof Risers > Custom Brackets >

18" Standard Riser (Steel) White | 2" Aluminum Saddle (White)
18" SkyLift roof riser bracket with 3" aluminum saddle
18" roof riser bracket


 
Our Price: $179.99


Availability: Usually Ships in 24 Hours
Product Code: SK18-B-2-ALW
Qty:

Description Technical Specifications Additional Item You'll Need
 

Shop 18” Steel Roof Riser with 2" Aluminum Saddle(s)


Our 18” standard duty roof riser bracket extensions feature professionally-engineered construction and a black, powder-coated finish. Designed to easily increase the height and/or pitch of most patio, deck, and pergola roof coverings, our 18” heavy duty, black powder-coated brackets can attach to rooftops, building sides, and more. The SkyLift hardware brackets are a simple, secure, and sealed roof attachment method to increase the height and/or pitch of your patio, deck, or pergola roof cover.


Installation Overview
Professional Product Engineering stamp available. Rebate up to $60.
SkyLift Hardware - Engineering Express.
No rebate available for PROJECT engineering.


1. Determine approximate positioning or layout of all SkyLift roof riser brackets prior to cutting any access holes. SkyLift positioning must be directly over exterior bearing walls. Take into consideration roofing material layout, rafter locations, and interior conditions. Repositioning may be necessary due to discovered conditions.
2. Remove roofing shingles/tiles carefully and save for reinstall.
3. Square and mark location.
4. SET SAW DEPTH to avoid cutting concealed items. Check wall plate and avoid obstructions or concealed items.
5. Cut access hole (minimum 3-1/2" x 6") through the roof decking/sheating, directly over the exterior bearing wall.
6. If unfavorable conditions are discovered, reposition the bracket location. (Before cutting any roof trusses or rafters, always obtain expert guidance and professionally prepared plans.)
7. Insert the SkyLift roof riser bracket through the access hole and attach to the exterior wall top plate using 4 ea. 1/4" x 3" Simpson Strong-tie SDS screws (included).
DO NOT SUBSTITUTE FASTENERS.
8. Remove the SkyLift saddle and fit a standard pipe jack flashing (not included) over the SkyLift riser column. Follow manufacturer's instructions on sealing pipe jack flashing to roof.
9. Cut and fit the roofing (removed in step #3) around the pipe jack flashing and reinstall. 10. Replace the SkyLift saddle and bolt to the SkyLift riser column (3/8" bolt and nut included).
11. Seat your cross beam in the SkyLift saddle and secure with Simpson Strong-tie SDS screws (included)
DO NOT SUBSTITUTE FASTENERS.
See instructions included with bracket for important safety and warranty information, limitations of warranties and disclaimers.


Accessories
Ultimate Pipe Flashing 1.50" - For Standard Risers Roof Snake
Our Price: $59.99

Add
Our Price: $39.99

Add
Ultimate Pipe Flashing 1.50" - For Standard Risers Roof Snake